Features of GT STORM Al
Beautiful appearance !
GT STORM is able to obtain excellent surface without being affected by Mg alloy defect.
Dimensional uniformity !
Dimensional change before and after GT STORM processing is uniform, also Including tapped hole.
Characteristics of oxide film !
- Thickness
- adjustable, 10 to 50 μm(excellent uniformity)
※To form a thin-film with a uniform film thickness distribution
- Corrosion resistance
- Salt spray test 96 h ~ (standard: 30 m)
Comparison with anodizing treatment
Processing method | Thickness | Corrosion Resistance (Salt spray test) |
Conductivity | Hardness | Surface Roughness | Glossiness (60°) |
|
---|---|---|---|---|---|---|---|
GT STORM Al | Anodizing | 10~50μm (※1) |
300h(RN9.0) (96hNo corrosion) |
2,000h Changeless |
300~600Hv | 0.5~1.5μm (※2) |
0.6~0.8% |
Anodizing (Die-casting) |
Anodizing | 3~10μm | 24h No corrosion |
1,100h Changeless |
120Hv | To form a thin-film with a uniform film thickness distribution | 1.2~1.4% |
Hardness: Al 20 ~ 150 Hv Anodizing 200 ~ 600Hv
※1 Thickness: adjustable, 10 ~ 50 μm
※2 Thickness: adjustable, 0.5 ~ 1.5 μm