TRI SYSTEM Performance
Test Conditions
We assure the product quality under the complete test conditions as follows.
| Measuring Time |
|
|---|---|
| Isothermal-isohumidity test conditions |
|
| Thermal Shock Test Conditions |
|
Measuring shielding・waterproof ? a helium leak test
By using water molecule ,which is smaller than helium gas ,we measure its ability of high shielding capability・waterproof.
We check if there is any leak or not by high shielding capability experimet equipment.
Aluminums and PPS resins
We implement a helium leak test at each status.
Copper and PPS resin
We implement a helium leak test at each status.
Measuring Cementing Strength - Cementing Tensile Force Test
After cementing a resin with a metal formed a cementing film by insert-molding, we measure cementing strength by using a precision load measuring instrument.
Aluminums and PPS resins
We implement a tensile force test by using a test specimen cemented an aluminum and a PPS resin at each status.
Copper and PPS resin
We implement a tensile force test by using a test specimen cemented a Copper and a PPS resin at each status.
Internal joining technology of metal and resin
| Item | Tensil Strength | He leakage test | High-temp&hum | Thermal shock | Remarks |
|---|---|---|---|---|---|
| Copper(Cu) | 25～35Mpa | OK | 25Mpa～ | 25Mpa～ | Mass production step |
| Aluminum(AL) | 35～45Mpa | OK | 25Mpa～ | 25Mpa～ | |
| Stainless(SUS) | 30～40Mpa | OK | 25Mpa～ | 25Mpa～ | Completed Development |
| Titanium(Ti) | 30～40Mpa | OK | 25Mpa～ | 25Mpa～ | |
| Iron(Fe) | 30～40Mpa | OK | 25Mpa～ | 25Mpa～ | |
| Magnesium(Mg) | 30～40Mpa | OK | 25Mpa～ | 25Mpa～ | |
| Zinc(Zn) | 30～40Mpa | OK | 25Mpa～ | 25Mpa～ | Mass production technology |
| Tin(Sn) | 30～40Mpa | OK | 25Mpa～ | 25Mpa～ | |
| Nickel(Ni) | 20～25Mpa | - | - | - | In development |
Applicable resin to TRI System※Used Material：AI
| classi cation | PBT | PPS | PA | PPA | TPE | TPU | PCT | PEEK | PP |
|---|---|---|---|---|---|---|---|---|---|
| Bonding properties |
〇 | 〇 | 〇 | 〇 | 〇 | 〇 | 〇 | 〇 | 〇 |
